UPS Systems & Power Backup Solutions Across Saudi Arabia
Online double-conversion, line-interactive & standby UPS from 1kVA to 1MVA for zero-downtime operations
What Is a UPS System?
An Uninterruptible Power Supply (UPS) sits between the utility grid and your critical equipment, instantly switching to battery power the moment mains power fails or fluctuates outside safe limits. For mission-critical systems — servers, medical equipment, production lines, control rooms — even a fraction-of-a-second gap in power can mean lost data, halted processes, or equipment damage.
UPS systems range from small standby units protecting a single server rack to large online double-conversion systems supporting an entire data center or manufacturing floor. The right topology and capacity depend on your load profile, required runtime, and how much power quality protection your equipment needs beyond simple outage backup.
We supply UPS systems across form factors and configurations to match where they're installed — tower and rack-mount units for server rooms and network racks, single-phase systems for smaller loads, and three-phase or industrial UPS for larger and process-critical facilities. Modular UPS platforms are also available where capacity needs to scale in place as your load grows.
UPS System — Typical Technical Parameters
| Capacity Range | 1 kVA – 1 MVA |
| Topology Options | Online double-conversion, line-interactive, standby |
| Battery Type | VRLA (sealed lead-acid) or lithium-ion |
| Standard Backup Runtime | 5–30 minutes, extendable with additional battery cabinets |
| Governing Standard | IEC 62040 (UPS systems) |
| Form Factors & Phase | Tower or rack-mount; single-phase or three-phase; modular options available |
From Load Assessment to Long-Term Support
Load Assessment & Sizing
Detailed load analysis and runtime requirements to size the correct UPS capacity and battery bank for your facility.
Equipment Supply
Sourcing of online double-conversion, line-interactive, or standby UPS systems matched to your operational requirements.
Installation & Integration
Electrical integration, battery bank installation, and connection to existing distribution boards carried out by our team.
Testing & Commissioning
Full load-bank testing, transfer-switch verification, and runtime confirmation before your systems go live.
Preventive Maintenance
Scheduled battery testing, capacity assessments, and runtime optimization to catch degradation before it causes downtime.
Standards & Compliance
- IEC 62040 — UPS system performance and safety requirements
- SASO — Saudi Standards, Metrology and Quality Organization requirements for installed electrical equipment
- SNMP/Modbus connectivity for remote monitoring and building management integration
- VRLA, Li-ion, and gel battery options matched to lifecycle and environmental requirements
- Static or maintenance bypass, so the UPS can be serviced or replaced without dropping the protected load
- Dedicated battery monitoring systems available for facilities that want cell-level visibility beyond standard UPS battery management
DC Power Systems
In addition to AC UPS systems, we supply and support DC power systems — rectifiers and DC distribution — for telecom cabinets, control rooms and industrial sites that run on DC rather than AC backup power.
Critical Facility Application Scenarios
UPS Maintenance Plans
One-Time Maintenance
A single scheduled visit — battery health check, load test, and full system inspection. Ideal ahead of a warranty review or after a power event.
Preventive Maintenance
Scheduled battery testing, capacity assessments, and runtime optimization to catch degradation before it causes downtime.
Corrective Maintenance
Rapid-response repair when a UPS fault, alarm, or battery failure occurs — our technicians diagnose and fix the issue to restore full backup protection.
UPS System Services Across Saudi Arabia
We supply, install, and maintain UPS and battery backup systems for critical facilities nationwide — from Riyadh, Jeddah, Makkah and Madinah to Dammam, Al Khobar, Dhahran and Jubail, and on to Yanbu, Taif, Abha, Tabuk, Hail, Qassim and Najran, covering every region of the Kingdom.
Frequently Asked Questions
How long will a UPS keep my equipment running during an outage?
Standard UPS battery banks typically provide 5–30 minutes of runtime at full load — enough to ride through a short outage or bridge to a generator start. If you need longer runtime, we size additional battery cabinets to your required duration rather than oversizing the UPS module itself.
VRLA or lithium-ion battery — which is better for a UPS?
VRLA (sealed lead-acid) is the lower upfront-cost, well-proven option with a typical 3–5 year service life. Lithium-ion costs more initially but lasts longer, weighs less, and tolerates higher temperatures better — relevant in the Gulf climate, where battery rooms often run hotter than the datasheet assumes. We size either option based on your budget, space, and expected battery life.
What size UPS system do I need?
It depends on your critical load and required runtime. We start with a load assessment to size the correct UPS capacity (we install systems from 1kVA up to 1MVA) and battery bank, rather than recommending a size before understanding your actual load profile.
What's the difference between online, line-interactive, and standby UPS?
Online (double-conversion) UPS continuously conditions power and offers the highest protection, suited to mission-critical loads. Line-interactive UPS regulates voltage and switches to battery on outage, a good middle-ground option. Standby UPS is the simplest and most economical, switching to battery only when mains power fails outright. We recommend the right topology based on your equipment's sensitivity and your budget.
UPS brands we supply, install and maintain
We work with the UPS systems commonly installed in Saudi Arabia and the GCC, so one team can supply, install and maintain the units on your site, including mixed-brand installations.
- Schneider Electric (APC)
- Eaton
- Vertiv (Liebert)
- Riello UPS
- Socomec
- Legrand
- ABB
- Huawei
- Delta Electronics
- Kehua
- Borri
- Gamatronic
- AEG Power Solutions
- Mitsubishi Electric
- Toshiba
- Fuji Electric
- Salicru
- INFORM
- KSTAR
- CyberPower
Brand names are trademarks of their respective owners. Black Arrow is an independent supplier and service provider.
Maintenance and support after handover
Our work does not end at commissioning. We keep your systems running with a maintenance plan built around your site.
1, 2 or 3-year maintenance contracts
Planned preventive maintenance visits, inspection and test reports, and recommendations, on a contract length that suits your site.
Emergency visits
Emergency call-outs are part of the maintenance contract and are handled with priority according to the criticality of your site.
One team for every system
We maintain every system we supply and install, and we can take over the maintenance of existing systems on your site.
Visit frequency, emergency arrangements and spare parts are agreed with each client based on the site and the systems covered.
Request a quote or site survey
Tell us about your site and what you need. An engineer will review your request and contact you to discuss it.
- Supply, installation and commissioning
- Maintenance contracts and emergency visits
- Site surveys and technical assessments